Tool Description: .250

Partial Match

Tool #

Description

In Stock

Our Sources

For Aircraft*

Photos

Add to Request

87966166

Description: Water pump pliers L.250mm

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

89785K51

Description: MECHANICAL TUBING 0.250X.035WALL SST316 X 6'LG

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

91514-1

Description: CERTICRIMP 2;SAHT .250 FAST

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

9216656

Description: RECHII KIT 8 SS PROBES RR.187SS/1.1WL, .218SS/1.1WL, .250SS/1.1WL, .312SS/1.5WL, .375SS/1.5WL, .437S

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9217154

Description: ROTATING PLASTIC PROBE 5.5 MM - 6.5 MM (0.218 IN. - 0.250 IN.)(OLYMPUS)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9217155

Description: BHEC PROBE (.250-.281 1.1 W/L)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9219980

Description: BOLT HOLE PROBES 7/32 INCH 1 (0.128 - 0.250”)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9219981

Description: PROBE ¼ INCH (0.250 –0.281”)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

9231597

Description: 1.125 TO 1.250 – 6.0WL PROBE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

96722803

Description: Hook and pick set L.250mm 4pcs

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

99D57004001000

Description: CALIBRATION BLOCK SET 6.35 MM (0.250 IN) THRU 23.42 MM (0.922IN), DIA.

In stock: 0

Sources: 4

For Aircraft*: A319
A318
A319 (Sharklets)
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)

Photos:

9C4966

Description: PILOTED REAMER .239/.2505

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

A115-930-100

Description: PROBE 5 MHZ PHASED ARRAY, 6.4 MM (0.250 IN) ELEVATION, 64 ELEMENTS, 0.8 MM (0.031 IN) ELEMENT PITCH, 3 M (9.8 FT) CONNECTION CABLE.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

A591S-SM

Description: MEDIUM SHEAR TD, 45° ALUM, 5MHZ X .250" X .250" ELEMENT, W/ SIDE CONNECTOR

In stock: 0

Sources: 1

For Aircraft*: A310
A310-200
A310-300
A310F
A310-200F
A310-300F
A300B2
A300
A300B4/C4
A300-600/600C/601
A300-600ST Beluga
A300F
A300-600 Combi
A300C4/F4 Freighter
A300-600F Freighter

Photos:

A593S-RM

Description: Medium Shear TD, 70° Alum, 5MHz x .250" x .250" element, w/ side connector

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

ACSMF100-.250/1M

Description: MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ACSMF100-.250/500K

Description: MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ACSU100-.250

Description: UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .250"Ø Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ACSU100-.250/4WL

Description: UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .250"Ø Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4003

Description: LOW FREQUENCY REFLECTION SURFACE PROBE 90° .250"Ø FLAT TIP .400" DROP, BENT, 1-25KHz , SHIELDED, 416 STAINLESS STEEL, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4003-6FT

Description: LOW FREQUENCY REFLECTION, SURFACE PROBE 90°, .156"Ø TUBING, .250"Ø FLAT TIP .300" DROP BENT, 1-50KHz , SHIELDED, 416 STAINLESS STEEL, 5.0" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4003/UNSH

Description: LOW FREQUENCY REFLECTION SURFACE PROBE 90° .250"Ø FLAT TIP .400" DROP, BENT, 1-25KHz , UNSHIELDED, 303 STAINLESS STEEL, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4003FT

Description: LOW FREQUENCY REFLECTION, SURFACE PROBE 90°, .250"Ø FLAT TIP .400" DROP BENT, 1-50KHz , SHIELDED, 416 STAINLESS STEEL, 5.0" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4003ST

Description: LOW FREQUENCY REFLECTION, SURFACE PROBE STRAIGHT, .250"Ø FLAT TIP, 1-50KHz , SHIELDED, 416 STAINLESS STEEL, 5.0" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4032

Description: LOW FREQUENCY DIFFERENTIAL SURFACE SPOT PROBE 5.0 " LONG, 5-30KHz, 90° DEGREES (RIGHT ANGLE) .250" DROP, .190"Ø OD WITH TRIAX FISHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4037

Description: LOW FREQUENCY RING PROBE .250"IDX.650" OD REFLECTION TRIAX FISCHER CONNECTOR 500HZ-10KHZ Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4038

Description: LOW FREQUENCY REFLECTION RING PROBE .866"( 22MM ) I.D. 1.250"( 31.7MM ) O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4049/2K

Description: LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz, .250" Ø ID, .650"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4077

Description: LOW FREQUENCY REFLECTION PROBE, 1-5KHZ, .250ID, .815 OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4087

Description: SPECIAL LOW FREQUENCY PROBE, Ø.250" TIP X .250" DROP, REFLECTION, 1-50KHZ, TRIAX, 6" LONG, 30° BEND,

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4090

Description: LOW FREQUENCY SPOT PROBE, 2-200KHz, REFLECTION, TOP MOUNT, .250"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4110

Description: LOW FREQUENCY SPOT PROBE, DIFFERENTIAL, .250" OD, 5KHZ-100KHZ, TRIAX FISCHER CONNECTOR. (SL/5KHz-100KHz/.25), SPO-2132. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4110/7L

Description: LOW FREQUENCY SPOT PROBE, DIFFERENTIAL, .250" OD, 5KHZ-100KHZ, 7 PIN LEMO CONNECTOR. (SL/5KHz-100KHz/.25), SPO-2132. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4148

Description: LOW FREQUENCY SPOT PROBE 1-20KHz, REFLECTION, .300" DROP ,90° DEGREES, .250" Ø, 5.0" LONG, BENT, SUPPLIED WITH A WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4148/4L

Description: LOW FREQUENCY SPOT PROBE 1-20KHz, REFLECTION, .300" DROP ,90° DEGREES, .250" Ø, 5.0" LONG, BENT, SUPPLIED WITH A WITH 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4154

Description: LF REFLECTION SPOT PROBE 1.5"HEIGHT .250"Ø OD TIP .300" LONG TRIAX FISCHER CONNECTOR. 100Hz-10 KHz. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4161

Description: LOW FREQUENCY DIFFERENTIAL PROBE WITH 6.0" PIG TAIL TRIAX FISCHER CONNECTOR, 1-10KHZ ( GO THRU .250' AL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4162

Description: LOW FREQUENCY REFLECTION PROBE WITH 6.0" PIG TAIL TRIAX FISCHER CONNECTOR, 1-10KHZ ( GO THRU .250' AL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4188/4L

Description: Surface Probe Absolute Shielded, 4.5" long, 90° degrees,350KHz-3MHz, .250" drop with 4 Pin Lemo connector. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4188/7L

Description: Surface Probe Absolute Shielded, 4.5" long, 90° degrees,350KHz-3MHz, .250" drop with 7 Pin Lemo connector. Includes Test Report and Certificate of Conformance...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4189

Description: LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .800"Ø I.D. 1.250"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz. Includes Test Report and Certificate of Conformance. LR0112-B3

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4291

Description: LOW FREQUENCY SPOT PROBE, BRIDGE / DIFFERENTIAL, .250"Ø OD, 500Hz-60KHz , SUPPLIED WITH A RIGHT ANGLE TRIAX FISCHER/LEMO SINGLE PIN CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4333

Description: LOW FREQUENCY REFLECTION SPOT PROBE, .250"Ø OD, .750" HIGH, 1KHz-10KHz, SIDE MOUNT TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4336

Description: LOW FREQUENCY REFLECTION RING PROBE, 50KHz-500KHz .250"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4337

Description: LOW FREQUENCY REFLECTION RING PROBE .875"ø I.D. 1.250"ø O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5032/2MHZ

Description: HIGH FREQUENCY SURFACE PROBE 1-3MHz 15° CRANK WITH 90° TIP, .250" DROP, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5032TF/2MHZ

Description: HIGH FREQUENCY SURFACE PROBE 1-3MHz 15° CRANK WITH 90° TIP, .250" DROP. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5037

Description: STAINLESS STEEL SURFACE PROBE, SHIELDED, 90° DEGREES, .125"Ø SHAFT, BENT 30° 1.0" FROM THE TIP, .250" DROP, 50-500KHz. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference:.... RMTF902-25-60B

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5062.250

Description: HIGH FREQUENCY ABSOLUTE PROBE 200KHZ, .250"Ø, 8"L, TRIAX CONNECTOR, (WITH THIN CENTRE SHAFT FOR USE ON LARGE Ø WHEELS)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5107

Description: LOW FREQUENCY SURFACE PROBE 1-40KHz, DIFFERENTIAL, 90°, .250" DROP, 3.0" LONG, SUPPLIED WITH A TRIAC FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5117

Description: HIGH FREQUENCY SPOT PROBE, UNSHIELDED DIFFERENTIAL / BRIDGE, .250"Ø COIL, .312"Ø TIP , 100KHz-500KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5128

Description: Hocking 12 pin hardwired 6.0" feet long 90° degrees reflection, .250"Ø tubing, .500" drop, 1-5KHz. Inclludes Test Report and Certificate of Conformance. Used with Hocking Phasec Series instruments

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5136

Description: SURFACE PROBE 90° 2" FROM THE HANDLE 1" AFTER THE 90°, .250 DROP .125" DIAMETER TIP, 100KHZ - 3 MHZ, 4.50" LONG TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5141/TF

Description: CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5144

Description: Rigid Surface Probe Absolute Shielded, 200KHz Center Frequency, .187"Ø Tip, 90°, .250" DROP, 15° Degree Crank, 4.5" long with Microdot Connector. Includes Test Report and Certificate of Conformance. Reference: 610-094-111

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5144/TF

Description: Rigid Surface Probe Absolute Shielded, 200KHz Center Frequency, .187"Ø Tip, 90°, .250" DROP, 15° Degree Crank, 4.5" long with Triax Fischer Connector. Includes Test Report and Certificate of Conformance. Reference: 610-094-111

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5145

Description: Custom Rotary Probe for Radiused Hole Inspection100KHz-2MHz., .250"Ø 4 Pin Fischer Connector with 2.0: working Length. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5164/TF

Description: MANUAL BOLT HOLE PROBE WITH DELRIN (PLASTIC)50-500KHZ DIFFERENTIAL UNSHIELDED, WITH A TRIAX FISCHER CONNECTOR .250"Ø DIA., 3.0" INCH WORKING LENGTH. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5218

Description: Rigid Surface Probe Absolute Shielded, 4.5" long, 90°, 350KHz-3MHz, .250" Drop, 15° Degree Crank .6" Long With Triax fischer Connector. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5228

Description: RIGID SURFACE PROBE BENT 50-500KHz, 90° DEGREES, SHIELDED, .125" DROP CRANKED AT 35° 1.250" FROM THE PROBE TIP. SUPPLIED WITH A TRIAX FISCHER CONNECTOR 5.0" LONG. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5251/.250SE/2WL

Description: UNIVERSAL ROTARY FLAT BOTTOM PROBE. SPLIT END. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .250"Ø Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5252

Description: Custom Flexible Surface Probe, 90°, .125"Ø, Frequency 1-3MHz, .250" Drop, 1.0" long handle machined to .425"Ø. Probe total length of 11.0" supplied with a microdot connector. Includess Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5257

Description: 90 DEGREE LOW FREQUENCY SURFACE PROBE, REFLECTION, .250" DIAMETER TIP .750" DROP 6.5" LONG 1-20KHz TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5287

Description: SURFACE PROBE NFE, 200KHz-1MHz WITH A CENTER FREQUENCY OF 500KHz, 15° CRANK WITH 90° TIP, .250" DROP, 4.5" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5300-.187SE/1T-6L

Description: FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .187"Ø-.250"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5300-.250SE/1T-6L

Description: FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .250"Ø-.312"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5457/350KHZ-3MHZ

Description: RIGID SURFACE PENCIL PROBE, ABS. Shielded, 350KHz-3MHz, .125"Ø Right Angle Shaft, .187"Ø"(4.75mm) Tip, 0.250" in. (6.4 mm) drop bent 15° .984"(25mm) from the tip. 6.0" (152mm) Long Supplied with a Microdot Connector. Includes Test Report and Certificat...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-6019

Description: ADJUSTABLE SLIDING PROBE, REFLECTION, 100HZ-500HZ, WITH 2 SINGLE MICRODOT CONNECTORS. SIZE: 3.50"L x 1.312"W x 1.250"H. Includes Test Report and Cerfificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF92-5/20KHZ

Description: DIFFERENTIAL SURFACE PROBE 20-25KHZ.250OD

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-0510

Description: 10MHZ .250" HARDWIRED STRAIGHT BEAM TRANSDUCER WITH BNC CONNECTOR. BOEING 767 PT 4 57-50-07

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-0516

Description: 5MHz, .250"Ø element contact transducer(high damped) case size( .700"H x .312"Ø Case) top mount microdot connector. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-0900RG

Description: CUSTOM STRAIGHT BEAM TRANSDUCER 2.25MHz 1.0" Ø. CASE SIZE:1.625"L x 1.250"W x .810"H WITH A TOP MOUNT BNC CONNECTOR. Includes Test Report.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-1025-7T

Description: SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 10.0MHZ, .250"Ø WITH TOP MOUNT MICRODOT CONNECTOR CASE SIZE:.375DIA x .700"H

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-1025H32

Description: Quick fit Screw in Type straight beam transducer, 10MHz .250"Ø Diameter, Top Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-1025SH32

Description: Quick fit Screw in Type straight beam transducer, 10MHz .250"Ø Diameter, Side Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-518S

Description: CONTACT TRANSDUCER, 5MHZ, .187" EL X .250" CASE, SIDE MOUNT, .5" HEIGHT

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-525-4S

Description: 5MHZ CONTACT TRANSDUCER .250Ø, .400H, SIDE MOUNT

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-525H32

Description: Quick fit Screw in Type straight beam transducer, 5MHz .250"Ø Diameter, Top Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-525SH32

Description: Quick fit Screw in Type straight beam transducer, 5MHz .250"Ø Diameter, Side Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-525T-32

Description: 5MHz .250" DIA. Alpha Series straight beam transducer. MSWQC Style, 1/4-28 THREAD Used with MSWQCA01105940. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-1017

Description: Custom Eddy Current Inspection Kit. Includes the following probes, Reference Standard and cables.AUR-.125SE/1.75WL-LF, AUR-.156SE/1.75WL-LF, AUR-.187SE/1.75WL-LF, AUR-.250SE/2.0WL-LF, AUR-.312SE/2.0WL-LF, AUR-.375SE/2.0WL-LF, AUR-.437SE/2.0WL-LF, AUR-...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-5300SE-7

Description: CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L,

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-ARR.156-.500SE

Description: RECHII ROTARY BOLT- HOLE PROBE KIT, 8 SPLIT END ROTARY PROBES SUPPLIED WITH A RECHII CONNECTOR(4 PIN STEP LEMO) FOR USE WITH THE OLYMPUS RA SCANNER. INCLUDES THE FOLLOWING BOLT-HOLE SIZE RANGES: .156"-.187", .187"-.218", .218"-.250", .250"-.281", .281"-.3

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-ARRY11

Description: Custom Rotary “Y” Probe for RA Scanner. Kit includes 11 probes in a waterproof storage case. One each of the following items: (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.500), (AR

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-ARRY13

Description: Custom Rotary “Y” Probe for RA Scanner. Kit includes 13 probes. One each of the following items: (ARRY-.125-.156), (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.281), (ARRY-.281-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.50

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-AURY14

Description: Y-Type Rotating scanner probe with 4 Pin Fischer Connector. Probe Kit Contains 1 each of the following in a shipping / storage container, 14 Probes Total: AURY-.125-.156/1.75WL, AURY-.156-.187/1.75WL, AURY-.187-.218/1.75WL, AURY-.218-.250/2.0WL, AURY-.25

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFM-570AS

Description: MEDIUM SHEAR TD, 70° ALUM, 5MHZ X .250 X .250

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-001/.25

Description: 2024-T351 ALUMINUM THICKNESS BLOCK 3.0" x 3.0" x .250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1016-6S-TI

Description: CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6, 51-00-02 PROCEDURE 1..... Hole Sizes: .188", .250", .313", .375" .438" .500". MATERIAL: 6AL-4V Titanium. Inc...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1045

Description: 5 STEP ACRYLIC WEDGE. STEP SIZES: .250", .500",. 750", 1.00", 1.250" MATERIAL: CAST ACRYLIC. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .002". Includes Certification and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1090AL

Description: 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1090SS

Description: 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS STEEL .PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. ..

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1090TI

Description: 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM .PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098AL

Description: 12 HOLE REFERENCE STANDARD 2024-T3 .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH ( 24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098St

Description: 12 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1098TI

Description: 12 HOLE REFERENCE STANDARD 6AL4V .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2003-2S

Description: 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: .187", .250" ,.312", .375", .437", .500", .562", .625", .687", .750", AND 1.0" ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 304 STAINLESS STEEL. Includes Test Repo

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2010AL

Description: Custom McDonnell Douglas 15 bolt hole reference standard with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.156", .172", .188", .203", .250", .266", .281", .297", .313", .328"...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2031/4340

Description: 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 4340 CRES STEEL. STEP RANGE:.040", .080", .160", .250", .300", .400", .500". +/-.001". Includes certification report traceable to NIST...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2031/6AL-4V

Description: 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 6AL-4V TITANIUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2031/7075

Description: 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2035

Description: 6 Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes: 1.0", 1.125", 1.250" ,1.500", 1.625", 1.750", ( .030 x .030 x .006 +/- .001) Corner EDM Notches and .010, .020, .040 Surface notches).. Includes Test Report and Certificate

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2041/AL

Description: 5 STEP WEDGE 7075-T6 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORT

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2041/AL-1

Description: 5 STEP WEDGE 2024-T3 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.** (0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm). IncludesTest Report Traceable to NIST and Certificate of

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2041/ST

Description: 5 STEP WEDGE 4340 steel:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2041/TI

Description: 5 STEP WEDGE 6al-4v TITANIUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2054AL-2

Description: CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2054CS-1

Description: CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2054CS-2

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2069AL

Description: 13 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2069TI

Description: 13 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.00...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2079/2024T3

Description: 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2091/AL

Description: 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 2024-T3. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2091/MAG

Description: 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2091/S

Description: 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 4340 STEEL. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2091/SS

Description: 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 300 STAINLESS STEEL. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2091/TI

Description: 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 6AL-4V. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2105/360

Description: 5 STEP BLOCK, .100, .250, .500, .750, 1.00. 360BRASS, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2105/6061

Description: 5 STEP BLOCK, .100, .250, .500, .750, 1.00. 6061 ALUMINUM, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2105/COP

Description: 5 STEP BLOCK, .100, .250, .500, .750, 1.00. COPPER, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2120

Description: CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2227Ti

Description: CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3012AL

Description: 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3036AL

Description: CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3062/13-8PH

Description: 8 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3062/15-5PH

Description: 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3062/17-4PH

Description: 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3065/2024AL

Description: 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3065/6061AL

Description: 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3065/7075AL

Description: 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3076AL

Description: 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3076AL-1

Description: 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3076AL-2

Description: 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3102AL/7075

Description: 9 STEP WEDGE .500", .625",. 750", .875", 1.0" , 1.125", 1.250", 1.375", 1.50". MATERIAL: 7075-T6 ALUMINUM WITH GRAIN DIRECTION. STEP PAD SIZE: 1.0" x 1.0". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3106TI

Description: 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3112

Description: Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3112/2014-T6

Description: Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3112/2024-T6

Description: Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3113

Description: Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3135AL

Description: 7 STEP WEDGE, STEP SIZES OF .190", .200", .210", .220", .230", .240", and .250" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3138MAG

Description: 7 STEP REFERENCE BLOCK. MATERIAL: MAGNESIUM STEP PAD SIZE: .75" X .75". STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3141AL

Description: Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3176AL-1

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3176AL-2

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3182AL

Description: 5 STEP WEDGE. STEP SIZES: .040", .100", .150", .250", .350". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: .75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3196AL

Description: CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .250",.500",.750", 1.000" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3197AL

Description: BOEING REFERENCE STANDARD 737 PT 6 51-00-00 FIGURE 3 PG.9 & 777 PT 6 51-00-02 PAGE 7-8. HOLE SIZES: 1.000", 1.250" . Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3201CS

Description: 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3216/TI

Description: 4 STEP WEDGE .125", .250", .500", .750". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3294/718I

Description: 6 STEP WEDGE, .050", .100", .150", .200", .250", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3305AL

Description: Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3329AL

Description: 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(.313), 11/32”(.343), 3/8”(.375), 7/16”(.437), 1/2”(.500), 9/16”(.562), 5/8”(.625), 3/4”(.750 Ø, 3 S

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3329ST

Description: CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3329TI

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3331AL

Description: 5 STEP WEDGE .750", 1.000", 1.250", 1.500", 2.000". TOLERANCE +/-.001". MATERIAL: 2219-T8 ALUMINUM, CLEAR ANODIZED. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3340CS

Description: CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3340SS

Description: CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3363

Description: 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3364

Description: 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3390AL

Description: CUSTOM 10 HOLE FLAT BOTTOM REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .218", .250", 312", .375" .437" .500",.562", .625",

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3391AL

Description: CUSTOM 10 HOLE FLAT BOTTOM HOLE REFERENCE STANDARD ASSEMBLY PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .875", 1.00", 1.125", 1.250" 1.375", 1.500",

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3405AL

Description: CUSTOM 15 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3412

Description: Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3416

Description: 8 Step Wedge For X-Ray . Material: 304 Stainless Steel. Step Sizes 0.125", .250", 0.375", 0.500", 0.625", 0.750", 0.875", 1.00". Tolerance ± .00078" (0.02mm). Pad Size: 25mm x 25mm(1.0" x 1.0") Tolerance ± .0196" (0.5mm). Surface Finish: Ra 0.8µm (32 µin)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3432/2050AL

Description: 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3432/2195AL

Description: 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3432/6061AL

Description: 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3461/C110

Description: 4 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .150", .250". +/-.001". PAD SIZE .75" x .75". MATERIAL: C-110 Copper. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3462AL

Description: 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3468MG

Description: 5 STEP WEDGE, STEP THICKNESSES OF .100", .150", .200", .250", .300". TOLERANCE +/-.001". MATERIAL: MAGNESIUM. PAD SIZE:75"x.75". Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3476CS

Description: CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION..737 PART 6 51-00-00 FIG.3 PG. 8, 757 PT 6 51-00-17 PAGE 7 FIG 3 and 767 PT 6 51-00-16 PAGE 7 FIG 3. Includes Test Report and Certificate of Conformance..... Hole Sizes: .188", .250", .313", .3...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3485AL

Description: Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3510/2024T3

Description: Contains 12 hole sizes; 187", .203", .218", .234", .250", .265", .281", .296", .312", .328", .343" and .359" diameters. ( .030" x .030" Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 2024-T3 Aluminum. Inclu...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3510/6AL4V

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3512AL

Description: MISTRAS 3 HOLE EDDY CURRENT TEST STANDARD, HOLE SIZES: .250", .375", .500" DIAMETERS, EDM CORNER NOTCH: .025" x .025" x .005 ± .002", MID-WALL NOTCH:.080" x .025" DEEP +/-.002" per BSS7048. 1 SURFACE EDM NOTCH .150" LONG x .030" DEEP. ALL NOTCHES TO B...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3520MAG

Description: 16 STEP WEDGE. STEP THICKNESS OF , .0625", .125", .187", .250", .312", .375", .437", .500", .562" .625", 687", .750", .812", .875", .937", 1.00" +/-.002". Pad Size: .620" x 1.5" . 9.20" Long x 1.5" Wide Finished Size. Material: AZ91E Magnesium. Includes

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3523AL

Description: 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3523CS

Description: 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3523MAG

Description: 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3523SS

Description: 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3523TI

Description: 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.

<< Previous Page

Page 4

Next Page >>

Contact info

Link Footer

services

Request Items (0)

Go to Request